As an Amazon Associate I earn from qualifying purchases.
At A Glance
D2, a high carbon, high chromium tool steel, is known for its hardness and wear resistance, suitable for heavy cutting tasks, but is more brittle and can be difficult to sharpen. Conversely, 8Cr13MoV, a Chinese stainless steel, offers a balance of hardness, toughness, and corrosion resistance at a lower price, making it ideal for everyday tasks and easier to sharpen, although it may require more frequent maintenance. The choice between these two steels largely depends on the intended use of the knife and individual preferences.
Top Rated Knives
D2 Steel
Sale
8CR13MOV Steel
Sale
Blade steel is one of the most important factors to consider when choosing a knife. D2 and 8Cr13MoV are two popular blade steels that are often compared. In this article, we will compare D2 and 8Cr13MoV in terms of their composition, hardness, toughness, corrosion resistance, edge retention, and ease of sharpening to determine which one is better for knives.
The world of knife-making materials can be a fascinating yet complex domain.
To help simplify this subject, this article will explore an in-depth comparison between two prevalent knife steel types: D2 and 8Cr13MoV.
We’ll be assessing their composition and comparing them in terms of their hardness, toughness, corrosion resistance, edge retention, and sharpenability to determine which one is superior for knives.
Steel Background
Before diving into the comparison, it’s essential to understand what each steel type is and how they’re manufactured.
D2
D2 is a high carbon, high chromium tool steel often referred to as “semi-stainless” as it falls just short of the required amount of chromium (13%) to qualify as full stainless. It’s known for its high hardness and decent corrosion resistance. D2 has been around for a long time and is popular among both custom knife makers and large production companies.
8Cr13MoV
8Cr13MoV is a Chinese stainless steel with a high-performance ratio, especially when considering its cost. This mid-range steel is quite popular due to its balance of hardness, edge retention, and corrosion resistance at an affordable price.
Steel Composition
The first point of comparison is the chemical composition of each steel.
D2
- Carbon: 1.5%
- Chromium: 12%
- Molybdenum: 1%
- Vanadium: 1%
- Manganese: .6%
- Silicon: .6%
- Iron: Balance
8Cr13MoV
- Carbon: 0.8%
- Chromium: 13%
- Nickel: 0.4%
- Molybdenum: 0.2%
- Vanadium: 0.1%
- Manganese: 1%
- Silicon: 0.3%
From the above composition, we can see that D2 has more Carbon, Molybdenum, and Vanadium than 8Cr13MoV, while 8Cr13MoV has more Chromium, contributing to its superior corrosion resistance.
D2 vs 8Cr13MoV – Complete Comparison
Hardness
Hardness is a crucial aspect of knife steel as it directly impacts edge retention and wear resistance.
D2 has a Rockwell hardness (HRC) of 55-62, which makes it one of the hardest steels available. It is a very wear-resistant steel that can hold an edge for a long time, but it is also more brittle than 8Cr13MoV and can chip or break under heavy use.
8Cr13MoV has a Rockwell hardness (HRC) of 57-59, making it slightly softer than D2. It is still a relatively hard steel and offers decent wear resistance.
Toughness
Toughness refers to a steel’s ability to resist chips and cracks under use.
D2 is tough steel that can withstand heavy use, but its high hardness can lead to brittleness, resulting in chipping or breaking under heavy use.
8Cr13MoV, on the other hand, being less hard than D2, is more ductile and, therefore, offers improved toughness.
Corrosion Resistance
The corrosion resistance of a steel determines how well it can resist rust and oxidation.
With 13% Chromium, 8Cr13MoV offers good corrosion resistance. It is a reliable choice for knives that will be used in wet or humid conditions.
With only 12% Chromium, D2 is more susceptible to corrosion and requires more maintenance to prevent rust. It’s classified as semi-stainless, falling just short of the stainless steel classification.
Ease of Sharpening
Ease of Sharpening signifies how easy the steel is to sharpen with normal methods. It usually correlates inversely with edge retention and hardness.
Due to its high carbon and chromium content, D2 can be difficult to sharpen. However, it can be sharpened to a razor-sharp edge with the right tools and technique.
On the contrary, 8Cr13MoV, due to its slightly lower hardness, is easier to sharpen. It doesn’t require any specialized tools or techniques to achieve a sharp edge.
Edge Retention
Edge retention is how well a steel retains its edge during use. Harder steels maintain their edge better but are more challenging to sharpen.
D2 has excellent edge retention due to its high hardness, but it can be challenging to sharpen.
8Cr13MoV also has decent edge retention, but due to its slightly lower hardness, it might need more frequent sharpening than D2.
Price
As a high-performance knife steel, D2 is more expensive than 8Cr13MoV. The cost is justified by its superior hardness and edge retention.
8Cr13MoV is a more affordable option compared to D2. It’s an excellent choice for budget-conscious buyers who still want a decent performance knife.
Conclusion
Both D2 and 8Cr13MoV are commendable blade steels, each having their unique strengths and weaknesses. D2 is a very wear-resistant steel that holds an edge for a long time, but it’s more brittle than 8Cr13MoV and can chip or break under heavy use. It is a good choice for knives that will be used for heavy cutting or chopping tasks.
8Cr13MoV, on the other hand, is a balance of hardness, toughness, and corrosion resistance at an affordable price. It is relatively easier to sharpen and is a good choice for everyday general-purpose tasks.
The choice between D2 and 8Cr13MoV will depend on the intended use of the knife and personal preference. Both steels are excellent choices for knives and are used by many knife makers and manufacturers. It is vital to choose a reputable brand and manufacturer when purchasing a knife to ensure that the blade steel is of high quality and has been appropriately heat-treated.
Do Sheepsfoot Blades Have A Purpose? (Cuz They’re Ugly…)
Read More
Spetsnaz Machetes – Blades Of The Russian Special Forces
Read More
What Is The Actual Purpose Of A Spear Point Knife Blade?
Read More
CRKT CEO Review – Coolest, Most Worthless Knife Ever?
Read More
How Sharp Is A Scalpel? (Is It Sharper Than A Razor?)
Read More
Can You Shave With A Knife? (Yes, Here’s How)
Read More
As an Amazon Associate I earn from qualifying purchases.